pigment powder suppliers

Features: 1 luminous with automatic absorption , luminescent , glowing performance, absorbing all kinds of natural light ( sunlight ) , such as visible light 5-15 minutes, you can continue to light at night or in the dark more than 8-15 hours , and phosphorescent pigment used. 2 stable physical and chemical properties , environmental adaptabil Features: 1 luminous with automatic absorption , luminescent , glowing performance, absorbing all kinds of natural light ( sunlight ) , such as visible light 5-15 minutes, you can continue to light at night or in the dark more than 8-15 hours , and phosphorescent pigment used. 2 stable physical and chemical properties , environmental adaptability strong , long life. Can outdoors or in harsh environments and resist ultraviolet radiation , high temperature (+1000 ℃) and low temperature ( under 1-20 ℃ in , the same black , not bad, good chemical resistance . 3. Luminous product Specifications : diameter (5um-200um) mesh ( 100 mesh -800 mesh ) ( 1000 mesh -2000 mesh ) 4 luminous use of : . should not be mixed with an opaque material , in order to avoid reducing its luminous efficacy is not and calcium -containing heavy metals , diluent , adjuvant mix can not be strong grinding, stirring tune methods should be used in 5 luminous plastic injection, extrusion application Notes : . glow in the dark pebbles of plastic can be injection , extrusion , such as :. PP, PE, PVC, PU, PS, ABS, TPR, EVA, nylon, acrylic, and other luminous direct injection time should be added to the amount of diffusion of the oil ( white wax ) , the proliferation of pink slip agent etc. so luminous even better in combination with plastic, preferably using a masterbatch , will be more evenly dispersed , to be fully dried before using masterbatch .

These Super phosphorescent pigment for solvent-based mediums can be mixed in just about any medium that is non-aqueous. Mixing these pigments with water (or even ambient moisture in the air) will damage the particles and decrease glow. The reds and oranges will produce a smell when they come in contact with moisture.These glow pigment powders(or ph These Super phosphorescent pigment for solvent-based mediums can be mixed in just about any medium that is non-aqueous. Mixing these pigments with water (or even ambient moisture in the air) will damage the particles and decrease glow. The reds and oranges will produce a smell when they come in contact with moisture.These glow pigment powders(or phosphorescent pigment as it is also called) Basics gives you some guidelines as to the usage of the Glow Powder products. These are just guidelines and the user should use their best judgment in working with the pigments.Basic Guidelines For Using Glow Powder.1. More powder, higher percentage will produce brighter, longer glow.2. Use a white, or light color as a background for best results. Any color other than white will diminish glow.3. Use the clearest vehicle possible. Any pigment in the vehicle will decrease the brightness and length of glow.4. The thicker (to a point) the layer of Glow Powder will produce longer and brighter luminosity.5. Try to prevent moisture in the manufacturing process. 6. Do not use vehicle with high acidity.7. Do not grind the Glow Powder, it will destroy the crystal structure and therefore decrease luminosity.8. The larger the particle size of the Glow Powder the greater the glow.9. Ratio of Glow Powder to medium is from 10% to 50% by weight depending on application and manufacture process.

Glow pigment powders is coloured powder that is used to produce a full range of colours. It is an inert colorant which has no binding power. These photoluminescent pigments are mainly composed of iron oxides and earth colors and contain binding agents.Using this powder, we produce all types of paints and colouring material like enamels, acrylics, p Glow pigment powders is coloured powder that is used to produce a full range of colours. It is an inert colorant which has no binding power. These photoluminescent pigments are mainly composed of iron oxides and earth colors and contain binding agents.Using this powder, we produce all types of paints and colouring material like enamels, acrylics, pastels, chalks, coloured pencils and oils. Further, these pigment powders can also be mixed with colour concrete, plaster, plastic resins, wood putties and epoxy and can also be used for applications such as tinting wood fillers, wood finishing, shading pore filler pastes, colored waxes or for touch-up on furniture.

a. short excitation time; long afterglow time, high brightness.glow pigments absorb nature light(sunlight) or lamplight for 10 minutes, then continuously glow in the dark  more than 12 hours.b. stable physical and chemical properties, strong enviromental adaptability, extremely long service timeheat-resistant, cold-resistant, anti-insolat a. short excitation time; long afterglow time, high brightness.glow pigments absorb nature light(sunlight) or lamplight for 10 minutes, then continuously glow in the dark  more than 12 hours.b. stable physical and chemical properties, strong enviromental adaptability, extremely long service timeheat-resistant, cold-resistant, anti-insolation.c. glow pigment powders are secure, reliable, energy conservation, enviromental protection.no toxic, no harm, no radioactivity, no burning, no explosion, no heavy metal.

Luminous powder for injection: pigment powder suppliers the ratio of luminous and plastic materials, generally is around 4% -10%, depending on the color depth of the product, plus less light color, dark color principle to pay more may be. A Ingredients: first spread of oil added to the raw stir for one minute, then add the luminous stir one minute, Luminous powder for injection: pigment powder suppliers the ratio of luminous and plastic materials, generally is around 4% -10%, depending on the color depth of the product, plus less light color, dark color principle to pay more may be. A Ingredients: first spread of oil added to the raw stir for one minute, then add the luminous stir one minute, two minutes plus toner stirring, mixing time should not be too long, pay attention! Luminous very sensitive to long-term iron friction material will darken too long. Second, the injection molding machine: Injection confidential clean, temperature should be transferred to a minimum, can be injection molded, the material in the injection molding machine time not too long, to avoid burning, injection molding machines of different products, there are also differences between the new and old machines machine, machine-made and imported machines, which require debugging slowly resolved. Third, the luminous: In injection molding, pigments in paint the long-term luminous various reasons, injection molding, injection molding machine, melting temperature of the material may cause darkening short luminous efficiency (luminous ZnS) good performance in terms of black injection point. If there are no special requirements for selection of short-acting luminous.

Long-lasting luminous rare earth materials by a non-toxic environmentally friendly , save by absorbing visible light for 10-20 minutes , or more light emitted up to 12 hours in the dark , glow in the dark gravels up to 15 years . Good weather resistance, can be used indoor and outdoor , resistant to temperature 400 ℃ -1000 ℃, widely used : watc Long-lasting luminous rare earth materials by a non-toxic environmentally friendly , save by absorbing visible light for 10-20 minutes , or more light emitted up to 12 hours in the dark , glow in the dark gravels up to 15 years . Good weather resistance, can be used indoor and outdoor , resistant to temperature 400 ℃ -1000 ℃, widely used : watches, toys , luminous numbers, fire logo , injection products, silicone rubber, printing or spraying.1 initial brightness:light pink under certain brightness detection equipment at 0 brightness values ( typically 3 seconds after the quench ) moments .Photoluminescent Tumbled Gravel pink around 20000-25000 . Since the initial rapid reduction sad moment , capturing moments error greater impact on the general brightness with one minute to more appropriate time.Highlighting powder is generally 3500 (med/m2) above , the glitter around 2800 , Cape glitter around 2300.